The dynamics of the spring isolators in their modern avatar

A lot of developments have taken place over a period of time in the spring vibration isolation hangers. In the initial years, pads of cork and rubber with a hole in the center were used as vibration damping materials within the hanger frame. Some of the spring

spring isolation hangers

spring isolation hangers

vibration isolators used the spring only for the desired deflection. It was much later that the modern spring loaded isolation hangers came into the existence. They have the single deflection and double deflection variants available to match the deflection requirements of the clients.
The construction of a spring vibration isolator is simple. It has a rectangular steel strip frame with holes at the bottom and top. A round pad elastomer is bonded to the metal frame at the bottom. A spring with a cap is placed on the elastomer pad. The part for which vibration isolation is required is suspended by a stud that passes through the bracket, elastomer and spring and is tightened with a nut on the spring cap. The hole in the bracket is so large that it allows a 30-degree angular freedom to the suspended part. Thus any variation in the construction or supporting structure is easily taken care of.
Like the bottom portion, the top of the spring isolator is also linked to the rigid structure through a wire or stud. The stud passes through the top hole in the rectangular bracket, round rubber pad, steel washer and is tightened with a nut. Here the rubber element ensures that there is no metal to metal connection and the structure is isolated from the hanger. The large diameter of the steel washer is a safety feature and in the case of a fire, even if the rubber burns the steel washer holds.
The features of the spring loaded isolation hangers are as follows:
• Adequate corrosion protection is provided to the rectangular steel plate housing by powder coating or galvanizing.
• The load capacity of the rectangular housing is tested at a multiple of 5 to the rated load capacity.
• Color coding is done to indicate the load bearing capacity and the deflection characteristics. The steel washer integrity is checked at 50 per cent overload conditions.
• As per the customer requirement, the spring vibration isolators can be supplied with the springs in the pre-compressed state from the factory.
• The spring vibration isolators are designed for a misalignment within an arc of 30 degrees.
• Neoprene is the preferred elastomer material for its capability to withstand tough environmental conditions.
• The spring isolators are easy to install. Direct mounting on the support structure or the stud rod is possible.

The spring isolators for HVAC are used to suspend the air conditioning equipment and ducting etc. from the ceiling or the support structure. The spring isolators HVAC work on the same principle as any other spring vibration isolator and can provide the desired spring deflection. The scale sticker on the bracket inside allows you to read the amount of deflection under load conditions. Based on the load capacity and deflection required you can easily make the choice of the right spring isolator for HVAC system. The spring

spring isolation hangers

spring isolation hangers

isolators for fans provide the ideal vibration damping with similar loads and deflections.
The chillers which are mounted on the floor are a very heavy piece of equipment. So instead of hangers, the spring isolators for chillers utilize the floor mounting techniques. Heavy springs are used along with the metallic brackets to suspend the heavy chiller tanks at the legs and other support points. Sometimes a set of springs is used in the same spring isolator to meet the load and deflection requirements. Since the flooring is isolated from the vibrations in the chiller tanks, the chillers can also be mounted on the rooftops to meet the regulatory guidelines.
If you are looking for spring isolators Edmonton or spring isolators in Houston, the right place to go is Andre HVAC International Inc. The company which came up more than a decade ago is highly specialized in the spring vibration isolators. The company website provides you with the data and tables for easy selection of the spring vibration isolation hangers. You have to clear on the dimensions and space availability along with the load and deflection requirements in order to make the choice. Whether it is the requirement for a chiller, fan or the complete HVAC system, you can find a wide range of the spring isolators in each category.

Take control of your vibration issues with the latest anti-vibration products

The popular vibration isolation products include small springs, neoprene, and fiberglass mounts that provide good vibration isolation medium. The common spring vibration isolators and anti-vibration mountings are readily available from the house of Andre HVAC. However, with the advancement in technology there are new products that make use of the visco-elastic polymers for the isolation of vibrations. These special elastomers not only absorb the vibration waves but also convert it into a small amount of heat energy that is dissipated. Listed below are the different types of vibration isolation products that are available and suited to specific customer requirements.

Vibration isolation systems: Andre HVAC International Inc. provides a wide variety of vibration isolation systems specifically designed to meet the end user vibration free applications. These include vibration control workstations, bench-top platforms, and vibration isolation system platforms. You can also get vibration isolation mounts for use by original equipment manufacturers when designing and retrofitting sensitive equipment.

Spring isolators for chillers: If you are into the installation of HVAC systems, you would have probably known by now that the noisiest part of the equipment is the chiller. The designers try to isolate it from the rest of the equipment by placing it into the mechanical room. Despite the isolation, the chiller vibrations and noise is transmitted via the structural members and can cause noise pollution in the work areas. The ideal solution for this problem is the use of spring isolators for chillers. The Andre HVAC International Inc. range of anti-vibration spring mounts provides the customers with a wide choice of anti-vibration products.

Anti-vibration fan mounts: Any rotating piece of equipment generates vibrations and fans are no exceptions. The vibration problem gets accentuated when there is a rotor dynamic balancing problem. The anti-vibration fan mounts are quite effective in isolating the fan vibrations from the support structure. Thus, the support structure stays protected from vibration damage and noise is greatly reduced.

Mason vibration isolation: Mason has earned a reputation for itself in the field of vibration damping, noise control and seismic isolators. The company has been in the field for more than five decades. The construction contractors demand the vibration isolators and vibration mounts as per the Mason brand name. Andre HVAC International Inc. brings to you the Mason vibration isolation products for your anti-vibration requirements.

HVAC vibration isolators: HVAC vibration damping is the area where Andre HVAC International Inc. made a modest beginning in the year 2003, in Ontario Canada. Today AHI enables building owners to execute their plans for installation of heating ventilation and air conditioning systems without the worry of noise and vibration problems. The dedicated expert team from AHI provides technical assistance to the customers in the selection of the correct HVAC vibration isolators as per their project specifications. The HVAC spring mounts from AHI reduce the transmission of noise and vibration from the pumps, motors, fans and chillers of the HVAC equipment to the building structure and protect it from damage.