Pipe spring hangers for isolation of noise and vibration in plumbing & piping system

In an industry, probably the requirement of an HVAC system could be quite different to the plumbing & piping systems. Generally, in HVAC systems pipes are used for carrying the fluids between different areas of a building. Similarly, in plumbing pipes, they transfer fresh water in a building. The point here is that, the energy transfer and water movement that happens during the process in the pipes must be efficient and quiet, without disturbing the people living and working in the building. Pumps and pipes tend to vibrate and create noise due to the flow of water within them. Worst of all, these pumps are located in a central mechanical room which most often ends up placed in a building, usually adjacent to an office or other working spaces. Even if the they are placed in a remote location, the noise and vibration gets transmitted through the pipes onto the adjacent structure in a different area of the building. So, to tackle issues like these specialists offer hanging spring isolators to curb the noise and vibration from the system.Spring hangers and their wide range of application in industrial and mechanical equipment’s

The key to effectively minimizing the high frequency noise and vibration is to properly isolate the equipment at the design stage of the project. As suggested by experts, noise and vibration alone isn’t just the problem.  It is often the combination of elements like the source (the pump or rotating equipment), the path (the piping or structure) and the receiver (the adjacent structure) together that creates the hassle. Generally, there are two paths for the transmission of vibration, one from a pump through the building structure and the other through the piping system. For noise and vibration transmitted through the attached piping systems engineers suggest springs isolation hangers for pipes.

For piping systems, you get several options. However, out of all the available options the best equipment for vibration isolation of piping, HVAC and plumbing systems are these highly effective and robust spring isolation hangers.  Spring hangers are equipment’s known to provide fabulous vibration control in comparison to deflection neoprene hangers. Powder coated steel spring with a neoprene cup, provides excellent isolation efficiency. While the spring serves as an isolator to a broad range of disturbing vibration frequencies, the rubber cup facilitates high frequency or noise break. Vibration spring hangers are equipment’s commonly used for suspended equipment like fan coil units, air circulation units, pipes, ducts, and other hanging structures or similar applications.

Leave a Reply

Your email address will not be published. Required fields are marked *